Racks

Whether you're kitting out your ride to be a full-on grocery-getter or just trying to get that sweaty backpack off your back, this adjustable rack gives you a whole new home for all of your haul-ables! - Aluminum - Carries up to 20 lbs - Easily add a crate! - Fits on all Pure Fix and Pure City bikes EXCEPT Premium Series, Urban Commuter, and Keirin Track Completes

- Seatpost rack - Fits seat post size 25.4-31.8mm - Bolt-on attachment for secure installation - Lightweight aluminum construction - Powder coated finish - Maximum capacity: 10 kg/22 lb

Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers. - Material: 25CrMo4 - Weight: 740 g | 26.1 oz (28'') - Loading Capacity: 26 kg (tested with 40 kg | 88 lbs) - Diameter: 10 mm | 0.4 in

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

Luggage Cage for triple cage mounts made of strong aluminium including high quality Nylon buckle straps. MATERIAL - 6061 Aluminium DIMENSIONS - 242 x 97 mm EXTRA INFO - 6 mounting holes for flexible attachment Nylon buckle strap max. load 3 kg WEIGHT - 281 g (incl. Straps)

This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.

The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb

Minoura's KCL-3F Pouteur is made from welded steel tubing and mounts to the front of the bicycles. It has an extra large surface area. - Fits 26 to 700c wheels - 11.4 x 16.9 - Max load of 40 lbs. - Durable black powder coat finish - Made of strong steel tubing

When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm

Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

You'll be able to haul a real payload with this strong rack from Portland Design Works. The Payload isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support a whopping 77 pounds of cargo. So you can bring everything along for the ride, from a week's groceries to the literal kitchen sink, you know, just in case. - Strong steel tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 1360 g (3 lbs) - Rated to 35 kgs (77 lbs)

Specifically engineered to fit a 12-pack of beer and your u-lock, this classy rack is ready to haul it all! Whether it's a run to the corner store, class, or just another day at the office the Urban Rack will cradle your essentials comfortably between its tie-down rails, or you can remove the rails to tote extra-wide loads all the way to your destination! - 9 1/2" wide x 11 1/4" long x 3" high for inside rail measurement.

It's always a good idea to have backup hardware. This is a replacement hardware pack for Portland Design Works Payload or Loading Dock rear racks. - 2x P clamps - 4x nyloc nuts - 4x hex bolts

You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)

Axiom's Streamliner Road DLX Rack is designed to fit on road bikes that don't have eyelets. It's made of reliable, light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Origin-8's Classique Sport Rear Rack is a versatile cargo-carrying solution. This lightweight and sturdy tubular 6061-T6-aluminum rack is adjustable to fit bicycles with 26-, 27-, 29-inch, and 700c wheels and is rated to carry up to 55 pounds of gear. It has a durable and attractive polished anodized finish and built-in hooks for your stretch cords, too.

- Front basket rack with integrated U-lock holder - Cargo net holds basket contents securely in place - Mounts to caliper hole and front axle - Adjustable fit for 26", 27.5", 29", and 700c - Heavy-duty AL6061-T6 alloy construction supports up to 55lbs - Platform area measures 12" x 14"

Made for traveling: The top rail is designed extremely narrow, still offering enough space to fit a tent, mattress and sleeping bag. Your panniers are mounted one level down. This lowers the center of gravity and improves the riding stability of your bike. In combination with TARA our LOGO models make the ultimate dream team for long-distance traveling. The LOGO also fits on particularly short frames. - Material: 25CrMo4 - Size: 26'' | 28' - Weight: 800g | 28.2 oz (26" | 28") - Loading Capacity: 26 kg | 57.3 lbs - Diameter: 10mm | 0.4 in

You love traveling with lots of luggage? Then you should avoid extra weight whenever you can, it’s only logical. LOGO CLASSIC EDELSTAHL will help you: Its design is particularly narrow, lightweight, and extremely durable. Offering lots of room for a sleeping bag & Co on top, plus space for side panniers, safe and stable. The LOGO CLASSIC EDELSTAHL also fits on particularly short frames. - Material: Stainless steel - Inches: 26'' | 28'' - Weight: 828g - Loading capacity: 26kg | 57.3lbs - Diameter: 10mm | 0.4in

- Rear rack with folding sides that allow for an easily expandable platform size - Sturdy tubular powder-coated alloy construction - Adjustable legs fit frames from 26" to 29" - Available in disc brake and rim brake compatible models - 59lb weight limit

You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).

Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.

TARA has no frills in its form, is uncomplicated and variable in its assembly – now even lighter in a titanium version.

Disc brake compatible leg for Megarack

The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour. - Material: 25CrMo4 - Weight: 780 g | 27.5 oz (28'') - Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*) - 10 mm | 0.4 in

The Fly is a lightweight carrier designed to carry panniers on a fast road or cross bike. Created with narrower tires in mind, the V-shaped Fly Evo allows for a low profile while protecting the rear wheel. It also features 3D-feet for simpler mounting. A single adjustable strut mounts the Fly to the bake bridge, making it a minimalist's dream. - Weight: 330 grams/11 ounces - Capacity: 18kg/39 pounds - Wheel size: 26-inch/700c

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches